Descripción
Información del Droducto
Pharmapore® I.V. The dressing consists of a pad placed centrally on a non-woven backing material for
patients with sensitive skin. The dressing has an incision along the middle for catheter and cannula
fixation.
•Breathable: allowing oxygen and moisture vapor exchange.
•Soft and Conformable: as it conforms to skin surface even the difficult areas like underarm and shoulders.
The IV variants are used for catheter and cannula fixation and securement.
No hay contraindicaciones absolutas para el uso de los productos, pero no debe utilizarse en pacientes con sensibilidad conocida al producto o a sus componentes.
• Reuse of the product increases risk of infection or cross-contamination.
• Desechar el producto como residuo contaminado.
• The dressing should not be used with highly exuding wounds as it may cause tissue maceration.
• The dressing should not be used on patients with known sensitivity to acrylic adhesive.
• The dressing should not be used on full thickness wounds and third degree burns. It can be applied on infected wounds only under medical supervision.
• The skin should be clear and dry before application to ensure good adhesion.
Generally the dressing could left in place up to 7 days.
1. Open the pouch using aseptic technique. In case of Pharmapore® PU I.V., hold the dressing at either
side of the wave cut and stretch the support paper a little to loosen the wave cut.
2. Remove the larger flap of the release liner to expose the adhesive surface.
3. Place the dressing on the injection site. Remove the lower flaps.
4. In case of Pharmapore® PU I.V., slowly remove the upper support paper while smoothing down the
transparent film dressing edges.
Información del Droducto
DescripciónPharmapore® IV is a sterile cannula fixation dressing, individually packed in a peelable pouch and E.O gas sterilized.
Pharmapore® IV is a sterile adhesive dressing with a pad at the point of injection for the reliable cannula fixation.
Beneficios- The dressing has an incision along the middle. At the end of the incision is a pad made from soft viscose, which does not adhere to the point of injection.
- The pad is made from a soft and very absorbent viscose fiber, laminated with perforated polyethylene film, which prevents the pad from adhering to the point of injection.
- The adhesive backing is made from nonwoven, meshed aerated very elastic and compliant 100% polyester fiber.
Benefits- Simplicity of use, the dressing offers the user safety and comfort as well as painless removal.
- The I .V dressing fastens the tube firmly to the skin whilst the pad covers the point of injection thus, the dressing does not adhere to the point of injection.
- The dressing allows air and humidity to pass freely.
- The materials used do not irritate the skin and are hypoallergenic. No traces of the adhesive remain on the skin after removal.
- The adhesive coated on the meshed non-woven has been evenly applied, does not irritate the skin and fastens to the skin reliably.
How To Use
Sizes & Codes
Pharmapore I.V. Size Units/ Box Boxes / Case IVNW76 7 cm x 6 cm 100 16 IVNW77 7 cm x 7 cm 100 16 IVNW87 8 cm x 7 cm 100 16 IVNW810 8 cm x 10 cm 100 16 IVNW8210 8.25 cm x 10 cm 100 16 IVNW856 8.5 cm x 6 cm 100 16 IVNW857 8.5 cm x 7 cm 100 16 IVNW8510 8.5 cm x 10 cm 100 16 IVNW85115 8.5 cm x 11.5 cm 100 16 IVNW97 9 cm x 7 cm 100 16 IVNW910 9 cm x 10 cm 100 16 IVNW1012 10 cm x 12 cm 100 16 IVNW1014 10 m x 14 cm 100 16 IVNW68 8 m x 6 cm 100 16 IVNW575 5.7 m x 5 cm 100 16 IVNW10155 10 m x 15.5 cm 50 16 IVNW555 5.5 m x 5 cm 100 16 IVNW657 6.5 m x 7 cm 100 16










Valoraciones
No hay valoraciones aún.